Key Features

• High initial tack, reducing need for initial support.
• Fast curing (skin formation ~5 min at 23°C/50% R.H., curing speed ~3 mm/24h).
• Stable paste consistency for easy extrusion.
• High shear strength after full cure (no primer needed).
• Remains elastic after curing; durable over time.
• Impervious to mould and virtually odour-free.
• Paintable with water-based systems (test compatibility for alkyd-based paints).
• Good weather and UV resistance (may discolour under extreme or prolonged UV but performance remains).
• Free of isocyanates and silicones; good adhesion on slightly moist substrates.
• Wide temperature resistance after cure: -40 °C to +90 °C.

Technical Data (typical values)

*Values may vary with environment and substrates; data relate to fully cured product.

Applications

• Sealing and bonding in building and construction (panels, profiles, joints in bathrooms/kitchens).
• Elastic bonding of panels, profiles, decorative elements on substrates like wood, MDF, chipboard, metals, PVC, plastics.
• Structural bonding in automotive, container industry (provided substrate compatibility is tested).
• Bonding mirrors and signage (heavy-duty bonding; immediate tack supports weight).
• General mounting adhesive: absorbent ceiling panels, façade elements (subject to preliminary tests).

Substrates & Surface Preparation

Suitable for most common building substrates: treated wood, metals, PVC, plastics. Surfaces must be rigid, clean, dry or slightly moist, free of dust and grease. Porous substrates in water-loaded applications should be primed with Primer 150; non-porous substrates cleaned/prepared with Soudal activator or cleaner. Not suitable for PE, PP, PTFE, bituminous substrates, copper or copper-containing materials (bronze, brass). Preliminary adhesion tests recommended.

Packaging & Storage

Available colours: white, black, grey, alu grey, light grey, brown, beige, anthracite, oak, brick red; other colours on request. Packaging: 80 ml tube, 125 ml tube, 290 ml cartridge, 400 ml foil bag, 600 ml foil bag, others on request. Shelf life: 15 months in unopened packaging at +5 °C to +25 °C in cool, dry storage.

Application Method

Apply with manual or pneumatic caulking gun. After extrusion, press components together; finish with soapy solution or Soudal Finishing Solution before skin formation. Clean uncured sealant with Soudal Surface Cleaner or Swipex. Repair with same material. Application temperature between +5 °C and +35 °C.

Safety & Remarks

• Consult label and Material Safety Data Sheet for handling and protective measures. Dangerous; respect precautions for use.
• May be overpainted with water-based paints; compatibility test recommended. Drying time of alkyd paints may increase.
• May discolour under extreme UV or chemicals, but performance unaffected. Avoid contact with bitumen, tar, plasticizer-releasing materials (EPDM, neoprene, butyl) to prevent discoloration or loss of adhesion. Do not use where continuous water immersion occurs.
• Not suitable as glazing sealant or for aquariums. For natural stone bonding, only on underside of tiles; not as joint sealant.
• When using multiple reactive sealants, allow full cure of first before next.